Tibet Solar-Storage Integrated Microgrid Project
Case introduction

CASE

Case

Tibet Solar-Storage Integrated Microgrid Project

Project Overview
Highjoule Group recently won a bid for a centralized procurement project for microgrid-related equipment at the headquarters of a certain engineering group in Tibet. Located in the surrounding areas of Tibet at an altitude of approximately 4,500 meters, the site features a typical environment characterized by extreme cold, low oxygen levels, and intense ultraviolet radiation, placing extremely high demands on the reliability of power equipment and the efficiency of construction and deployment.



  1. Project Details

Application Scenarios

This project is primarily intended to ensure power supply for engineering and production activities in plateau regions. To address the challenges posed by the high-altitude environment, Huijue Technology Group conducted specialized high-altitude environmental verification and system derating design during the solution design phase to ensure that core equipment can still dissipate heat efficiently and operate stably under conditions of thin air.

Installed Capacity

This project employs a configuration consisting of 4 foldable PV containers and 2 energy storage cabinets. The specific parameters are as follows:

PV System: Each container has a PV capacity of 98.8 kW, with a total installed capacity of 395.2 kW (98.8 kW × 4).

Energy Storage System: Two energy storage cabinets are configured, with a total storage capacity of 522 kWh (261 kWh × 2).

Major Equipment

Foldable PV Containers: Featuring a modular, deployable structural design, the volume is compressed to one-third that of conventional systems during transport, significantly reducing the difficulty of long-distance transportation in high-altitude regions. On-site installation requires only hoisting, deployment, and wiring; under normal conditions, two people can complete the deployment of a single system within 4 hours.

Energy Storage Cabinet: Equipped with wide-temperature-range lithium iron phosphate (LiFePO₄) batteries and intelligent thermal management strategies, the system supports normal charging and discharging within the temperature range of -30°C to +55°C, making it highly suitable for high-altitude environments.



Project advantages

Strong Adaptability to High-Altitude Environments
Strong Adaptability to High-Altitude Environments
The system has undergone specialized verification and derating design to address extreme conditions at 4,500 meters, including low atmospheric pressure, low temperatures (down to -30°C in winter), and intense solar radiation. This ensures efficient heat dissipation and stable operation in thin air.
Easy Installation and Flexible Scalability
Easy Installation and Flexible Scalability
The foldable PV container significantly reduces transportation challenges and enables efficient and convenient on-site deployment. The system design incorporates standardized interfaces and a modular architecture, allowing for flexible expansion with additional PV units or energy storage cabinets in the future to accommodate growing power demand, enabling effortless “plug-and-play” scalability.
Integrated Microgrid System Solution
Integrated Microgrid System Solution
By coordinating the operation of renewable energy generation and energy storage, this solution effectively improves energy utilization efficiency in plateau regions, reduces reliance on traditional fossil fuels, and provides robust support for green and stable energy use in these areas.

Core products

Traditional optical cable transfer box (stainless steel)
Traditional optical cable transfer box (stainless steel)

The optical cable transfer box is a transfer equipment that provides optical cable termination and jumper connections for trunk layer optical cables and distribution layer optical cables. After the optical cable is introduced into the optical cable transfer box, after being fixed, terminated, and distributed, fiber jumpers are used to connect the trunk layer optical cable and the distribution layer optical cable.

Box-type jumper-free optical cable transfer box (stainless steel)
Box-type jumper-free optical cable transfer box (stainless steel)

The optical cable transfer box is a transfer equipment that provides optical cable termination and jumper connections for trunk layer optical cables and distribution layer optical cables. After the optical cable is introduced into the optical cable transfer box, after being fixed, terminated, and distributed, fiber jumpers are used to connect the trunk layer optical cable and the distribution layer optical cable.
It is suitable for metropolitan optical fiber access networks and FTTH/FTTB terminal optical fiber distribution. It is widely used in outdoor overhead and floor-standing installations to meet the needs of urban broadband, 5G fronthaul and other scenarios.

Book Type Terminal Box (Metal)
Book Type Terminal Box (Metal)

The optical cable terminal box series products are auxiliary equipment for terminal wiring in optical fiber transmission communication networks. They are suitable for direct and branch splicing of indoor or outdoor optical cables, and protect optical fiber joints. Optical cable terminal boxes are mainly used for fixing optical cable terminals, splicing optical cables and pigtails, and containing and protecting remaining fibers.

Intermediate distribution fram
Intermediate distribution fram

The Intermediate Distribution Frame is a key device used in fiber optic communication systems for cable termination and distribution, enabling fiber line connection, distribution, and scheduling.

Line Side ODF
Line Side ODF

The HJ-GPX-0007 Optical Distribution Frame is designed for fiber optic cable distribution and management in optical communication systems. Made of Cold Rolled Steel, it provides reliable fiber splicing, distribution, and scheduling capabilities.

Solution

Introduce safe and efficient clean energy to achieve energy-saving, low-carbon operations and stable, secure performance for communication base stations.
Introduce safe and efficient clean energy to achieve energy-saving, low-carbon operations and stable, secure performance for communication base stations.
Introduce safe and efficient clean energy to achieve energy-saving, low-carbon operations and stable, secure performance for communication base stations.
Make full use of the tops of transmission towers, machine room roofs, and idle land at base stations for component installation, optimizing base station resources. This enables energy savings, safe operation, and meets the needs of both existing and 5G infrastructure development by introducing safe and efficient clean energy sources—solar and wind power.
View More
With a 98.7% high-efficiency conversion rate, we help businesses achieve low-carbon, sustainable development and shorten the customer investment payback period.
With a 98.7% high-efficiency conversion rate, we help businesses achieve low-carbon, sustainable development and shorten the customer investment payback period.
With a 98.7% high-efficiency conversion rate, we help businesses achieve low-carbon, sustainable development and shorten the customer investment payback period.
From energy storage system design to installation and maintenance, we offer a comprehensive “turnkey” industrial and commercial energy storage service that effectively addresses issues such as transformer capacity limitations, high electricity costs, and power outages.
View More
Providing cost-effective clean energy solutions for industrial, commercial, and residential facilities.
Providing cost-effective clean energy solutions for industrial, commercial, and residential facilities.
Providing cost-effective clean energy solutions for industrial, commercial, and residential facilities.
The microgrid system is custom-designed by integrating clean energy, energy storage systems, the public grid, and generators, tailored to meet the specific needs of the customer.
View More
Reduce reliance on the grid, making electricity usage more economical.
Reduce reliance on the grid, making electricity usage more economical.
Reduce reliance on the grid, making electricity usage more economical.
From product customization to installation and maintenance, we offer comprehensive residential energy storage services to meet various energy needs, creating intelligent, eco-friendly, and energy-efficient energy management solutions.
View More

Professional Integrated "Turnkey" Service System

Please feel free to call our customer service hotline or leave us a message online. We will provide you with efficient and comprehensive service.
Contact Us
X

You can send us your product requirements or questions here

Submit Now